[wcm_restrict]
Click Here To Join
———————
This is Week 4 of the SECOND MESOCYCLE in the “Pre-Exhaust Supersets” Training cycle.
THIS IS THE FINAL WEEK OF THE PROGRAM! Next week will be the DELOAD before the NEW CYCLE!
Please read Pre-Exhaust Supersets blog to learn about this training program.
Now as we enter WEEK 4, we will see the LENGTHENED movements all within 0-2 reps from failure.
All of the SHORT OVERLOAD (lower fatiguing) movements are now using “partial rep sets” after failure. THIS WEEK, many of the short movements will progress into LENGTHENED sets, which essentially means to take a FULL REST (2-3 min) then complete a set with 20-30% heavier weight than the prior set.
Most protocols in the program will use lengthened sets with a “partial rep match” protocol. This means that if you achieve 10 Reps on the first set, you will achieve 10 reps on the heavier second set, but you will likely only make a few FULL ROM REPS, then complete the remaining reps with partials (such as 4 full reps + 6 partials to equal the 10 reps achieved on the initial set).
—
Monday
Lower Body
Part A and B Repeat week to week
A. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
Seated Leg Curl OR Lying Leg Curl x 10-15 Reps (see note below)
Romanian Deadlift (RDL) (Barbell OR Trap Bar) (~1-2 then 0-1 reps from failure)
Rest 2-3 min between harder work sets
First work set of leg curls = to technical failure with FULL ROM REPS
Second work set of leg curls = Add 20-25% weight, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
***If this superset presents a logistical issue (and you can’t bring a barbell to the leg curl machine), you may find it more reasonable to bring DBs over to that area
—
B. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
Sissy Squats (see below) x 8-15 Reps (~1-2 then 0-1 rep from failure)
Walking DB Lunges (quad dominant) x 10-16 Reps (5-8/leg) (~2-3 then 1-2 reps from failure)
Rest 2-3 min between harder work sets
***Note that there will not be a lengthened set or partial reps here because both of these movements are already overloaded at the lengthened position (bottom of the rep)
Sissy Squat Variations (stay consistent week to week)
Weighted Sissy Squats
Sissy Squats (BW only)
Band Assisted Sissy Squats
Wall Assisted Sissy Squats
—
C. Kas Glute Bridge
Reps 15-12-10 (increasing weight/effort each set)
Target ~4-2-0 reps from failure across the 4 sets
+ Superset the FINAL SET ONLY with:
(weighted) Hip Extensions x 6-10 Reps (to technical failure)
*See videos below
Hip Extensions Variations (stay consistent week to week)
45-degree
Horizontal/GHD
Home Hack (with barbell and box)
Home Hack (with barbell only)
—
D. Leg Extensions
1 warmup x 10-15 Reps
2 work sets x 10-15 Reps (~1 then 0 reps from failure)
+ immediately after SECOND work set:
Rest 15 seconds
Heels Elevated Goblet Squat
4 sets of 5-8 Reps (Rest 15 sec between each)
Use ~20 rep max weight
—
E. Garhammer Crunch
4 sets of 6-12 Reps
Rest ~1 min b/w each
+ Superset the FINAL set with:
Decline/Flat Sit-ups x 6-15 Reps
—
F. Calf Raise Machine
3 sets:
Reps 12-10-8 (increasing weight)
+ Hold the bottom stretch for 10-15 seconds after failure on the final set
——————–
Tuesday
Upper Body
Part A and B Repeat week to week
A. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
Cable Crossovers OR Pec Fly Machine x 10-15 Reps (to technical failure; see note below)
Flat DB Bench Press x 6-10 Reps (~1-2 then 0-1 rep from failure)
Rest 2-3 min between harder work sets
First work set of Crossovers = to technical failure with FULL ROM REPS
Second work set of Crossovers = Add 20-25% weight, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
1. Flat DB Fly Superset to Flat DB Bench Press
2. Cable Crossover (wide arms) Superset to Cable Costal Press (narrower “press” style)
—
B. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
***Use the same bar attachment and station for this superset. This will make it super easy inside a crowded gym setting (you will need to INCREASE the weight for the Wide Grip Pulldown)
Straight Arm Pulldowns x 10-15 Reps (see note below)
Wide Grip Pulldowns x 6-10 Reps (to technical failure)
Rest 2-3 min between harder work sets
First work set of Straight Arm Pulldowns = to technical failure with FULL ROM REPS
Second work set of Straight Arm Pulldowns = Add 20-25% weight, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
—
C. Dual Cable Lateral Raise OR Butterfly DB Lateral Raise
1-2 warm-up sets, then:
Start with tough set of 10-12 Reps (to technical failure)
Then complete 25 reps in as few sets as possible
Rest only 10-15 sec between sets
Chip away till 25 total reps are achieved
—-
D. Neutral Grip “Lat” Pulldown
1-2 warm-up sets, then:
Start with tough set of 10-12 Reps (~1 rep from failure)
Then complete 25 reps in as few sets as possible
Rest only 10-15 sec between sets
Chip away till 25 total reps are achieved
Pulldown Alternative options:
Neutral Grip Rack Pull-ups
Neutral Grip Foot Assisted Pull-ups
—
E. Superset x 2 sets:
1 warm-up set prior, then:
2 tough work sets each
Hinged Cable Pushdown OR Cross Cable Tricep Pushdown x 10-15 Reps (to technical failure)
Overhead DB Tricep Extensions OR Cross Cable Overhead Tricep Extensions x 6-10 Reps (~1 then 0 reps from failure)
Rest 2 min
—
F. Incline DB Curls OR Face Away Cable Curls
1-2 warm-up sets, then:
Start with tough set of 10-12 Reps (~1 rep from failure)
Then complete 25 reps in as few sets as possible
Rest only 10-15 sec between sets
Chip away till 25 total reps are achieved
—
Thursday:
Lower Body
Part A and B Repeat week to week
A. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
Leg Extensions (pause contraction) x 10-15 Reps (see note below)
Hack Squat OR Leg Press x 6-10 Reps (~1-2 then 0-1 rep from failure)
Rest 2-3 min between harder work sets
First work set of leg extensions = to technical failure with FULL ROM REPS
Second work set of leg extensions = Add 20-25% difficulty, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
***If this superset is impossible in a crowded gym, there are TWO possible alternatives which will accomplish a similar goal:
1. Leg Extensions Superset to Heels Elevated Goblet Squats
2. Sissy Squat or Bodyweight Leg Extension Superset to Hack or Leg press
—
B. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
(Weighted) Hip Extensions (see below) x 8-12 Reps (see note below)
DB RDL (without hip extension) x 8-12 Reps (~1-2 then 0-1 rep from failure)
Rest 2-3 min between harder work sets
First work set of Hip Extensions = to technical failure with FULL ROM REPS
Second work set of Hip Extensions = Add 20-25% weight, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
***You will need to bring DB’s over to the area where you perform Hip Extensions
Hip Extensions Variations (stay consistent week to week)
45-degree
Horizontal/GHD
Home Hack (with barbell and box)
Home Hack (with barbell only)
—
C. Flat Foot Split Squats
(heel wedge optional; will give slightly more quad stimulus)
1-2 warm-up sets per leg, then:
2 tough work set x 8-12 Reps per leg (~2 then 1 rep from failure)
Rest 1-2 min BETWEEN legs for work sets
—
D. Seated Leg Curl OR Lying Leg Curl
1 warm-up set x 12-20 Reps (easier effort, groove the movement)
1 tough set x 10-15 Reps (to technical failure)
Rest 15-20 seconds
3 sets x max reps unbroken
Rest only 15-20s between each (goal for 3-7 reps per set)
—
E. 6 Minutes:
Climb as high as possible in reps
Decline (weighted) Sit-ups x 5-10-15-20… (add 5 reps each round)
Hanging Oblique Knee Raise x 10 Reps (5/side, alternating)
—
Friday
Upper Body
Part A and B Repeat week to week
A. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
Bentover Reverse Flies x 15-20 Reps (to technical failure; see note below)
Chest Supported Row (see below) x 8-12 Reps (to technical failure; see note below)
Rest 2-3 min between harder work sets
First work set of BOTH MOVEMENTS = to technical failure with FULL ROM REPS
Second work set of BOTH MOVEMENTS = Add 20-25% weight, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
***You will need to bring DB’s over to the area where you perform your Row variation
Chest Supported Row Options (stay consistent week to week)
T-Bar Row
Seated Machine Row
Seated Cable Row
DB Seal Row
Prone DB Row
Head Supported Row
—
B. Superset Movements:
1-2 warm-up sets each, then:
2 work sets (see designated “reps from failure” for each)
DB Lateral Raise (no loss of tension at bottom) x 10-15 Reps (to technical failure; see note below)
Steep Incline Anterior Delt Press x 6-10 Reps (~2 then 1 rep from failure)
Rest 2-3 min between harder work sets
First work set of lateral raises = to technical failure with FULL ROM REPS
Second work set of lateral raises = Add 20-25% weight, and match reps to first set
(understand that this will likely be 3-6 “full” reps followed by partials to match prior rep total)
Example:
First work set = 10 full reps
Second work set = 3 full reps + 7 partials (10 total reps)
—
C. Wide Grip Pulldowns
Complete 60 Reps in as few sets as possible
Start with 15-20 unbroken (0-1 reps from failure)
Rest 30-45 sec between sets until 60 Reps
Each set to 0-1 reps from failure
+ After the FINAL set…
Complete 3-4 “attempted partial reps”
(i.e. you try hard as possible to make the rep, but fatigue prohibits you from getting full range of motion)
—
D. Incline DB Bench (1 and 1/2 reps)
1-2 warm-up sets then:
1 tough work set x 8-10 Reps (~1-2 reps from failure)
Rest 2-3 min
Then complete 5 sets of 5 Reps (using the same weight)
Rest ~1 min between 5-rep sets
—
E. 3 Rounds:
Use ~15 rep max weight
Complete Reps 12-10-8 (for biceps and triceps)
Use same weight all rounds
Keep continuous movement
***Note different rep targets for the lateral delt swings
Seated DB Curls
One Arm Tate Press
Seated DB Lateral “Swings” x 20-30 Reps
(Use DOUBLE the weight of lateral raise for 12-15 reps)
——————–
Saturday – OPTIONAL Conditioning
45-60 Minutes of ZONE 2 Cardio
This is best done on a bike or elliptical.
It can be done with rowing or running, however most people are inefficient rowers and runners, and therefore will often find it difficult to stay within the tight heart rate area required for ZONE 2
The section below will expand on this magic heart rate zone and how to find it.
The “Gold Standard” for determining ZONE 2, is to measure lactate. We would want to be between 1.7-2.0 mmol/L
Since this is not widely accessible, there are 3 Proxies you can use to determine your ZONE 2
1. The starting point is to use a crude Heart Rate measurement of 180 minus age. If you are in poor cardio shape, you can subtract 5-10 BPM from that. If you are in great cardio shape, add 5-10 BPM to that.
2. A “stressed” conversational level of exertion. This would mean you could be on a call with someone the entire time, but they would know you were exercising.
3. A pace you could hold sustainably for 60 Minutes without decreasing output due to fatigue.
A really cool metric to pay attention to is the WATTS that you are able to put into the exercise. Once you know what you can sustain for watts, you won’t have to pay attention to heart rate as much anymore. That is to say, until you become more fit, and then you may want to re-check your heart rate to make sure that the watts you’re using are still effective. It’s like progressive overload for cardio.
———————–
SUNDAY – REST DAY
——————–
[/wcm_restrict]